pictured: Radian Metal Dining Table. 40x72x29″h Pietra Serena stone top. Horizontal Brushed Steel on a 4 leg pedestal with center wiring column and a 4″ d wiring grommet. Paired Blasted Steel rails secure 1/2″ thick plate Steel legs in a versatile rail system that can adapt to many size, shape & wiring requirements.
Radian Metal Dining Table
Single piece tops: 42/48" x 90/96/108/120" x 29"h
Multiple piece tops: 42/48/54/60" x 96/120/150/180/216" x 29"h.
Textured plate steel legs in a doubled up rail system incorporate adjustable Black Neoprene top supports. Three or four leg pedestals with integral wiring grommets are joined by connecting center rails for large Glass or Stone Conference tables to 30'. The adaptable rail structure allows a wide variety of shapes including: Round, Square, Boat, Tri-arced, Oval and Racetrack.
The double rail system has a Blasted finish while 1/2" plate Steel legs are textured with a variety of Brush patterns and sealed with a clear Lacquer. Leg plate finish textures include: "Cross-hatch Brushed", "Light Cross-hatch Brushed","Horizontal Brushed" or "Buffed" (pictured) texture. A regimented brush pattern exposes the random mill finish pressed into molten steel during the "Hot Rolled" fabrication process.
Clear, Frosted (Green or Blue), Back-Painted (Silver or White) and "Scratched" glass tops are available with a Clear border ("Patterned") option. Clear & Diffused Glass tops expose the table structure whereas Back-painted Glass is opaque. Glass Conference Tables to 30' in multiple pieces with a Blasted Steel T-bar between to stabilize and separate the sections from each other.
Stone tops have a Blasted or Hand-chiseled border. Options include Absolute Black Granite (Honed or Polished), Cleft Black Slate and Honed Jerusalem Limestone (Gray or Beige). Stone Conference Tables to 30' in multiple pieces with a powder-coated T-bar between to stabilize and separate the sections from each other.
4"d wiring grommets have 2 power & 2 data outlets with a pass-though hole for additional corded audio/visual jacks. They are fitted in the end of a Blasted Steel wiring column that extends down to become a structural element, linking the radiating legs. The column is held 3/4" above the floor to sit over a floor outlet. An optional wire chase runs between pedestals and a 4"d grommet housing can be added between pedestals if needed. Pass-through wiring holes at 3/4"d or 2"d for permanently placed speaker phones, etc.