pictured: 54″x12.5′x29″h Crescent Conference Table with Brushed Stainless Steel panels and Maple coves. Boat shape, Patterned Scratched Glass conference table top in 3 sections w/ 2- 4″d wiring grommets. A concave cove detail at the ends of the pedestals, contrasts with the curved S. Steel or Wood side panels. Multiple pedestals are joined by a solid Aluminum rail structure. Stone or Glass tops in multiple sections for Conference Tables to 30′.
Crescent Glass Conference Table
Single piece tops: 42/48" x 90/96/108/120" x 29"h
Multiple piece tops: 42/48/54/60/72" x 96/120/150/180/216" x 29"h.
The pedestal's curved side panels are standard in Stainless Steel with an option for Wood veneer. The finish on top of the pedestals coordinates with the concave coves at the ends, that separate the side panels. A Wood veneer finish is standard for the coves, with an up-charge for Blasted Steel or Brushed Aluminum. Many sizes and shapes are possible including Rectangle, Boat, Racetrack, Oval , Tapered & Horseshoe.
Brushed Stainless Steel panels are riveted to a curved form and are removable for wiring access. The unique horizontal Brush pattern is applied in long strokes that stretch the width of the panel and read as horizontal stripes. Concave end coves are finished in Blasted Steel or Wood veneers. A Solid Aluminum rail structure is Brushed except on the top which is Blasted for less reflectivity under Glass tops.
Cherry, Maple, Ash (Natural or Black), Bamboo and Anigre veneers. Custom staining available by request. Optional Wood panels are attached without exposed rivets so they are not removable for wiring access.
Clear, Frosted (Green or Blue), Back-Painted (Silver or White) and "Scratched" glass tops are available with a Clear border ("Patterned") option. Clear & Diffused Glass tops expose the table structure whereas Back-painted Glass is opaque. Conference Tables tops to 30' in multiple pieces with a Blasted Aluminum T-bar between to stabilize and separate the sections from each other.
Stone tops have a Blasted or Hand-chiseled border. Options include Absolute Black Granite (Honed or Polished), Cleft Black Slate and Honed Jerusalem Limestone (Gray or Beige). Conference Tables to 30' in multiple pieces with a powder-coated T-bar between to stabilize and separate the sections from each other.
The hollow pedestals have removable Stainless Steel panels for interior access and can be placed over a floor outlet for seamless wiring integration. 4"d wiring grommets with a Brushed Aluminum cap have 2 power & 2 data outlets with a pass-through hole for an additional corded audio/visual jack. Wiring troughs can be specified with Small, Medium or Large outlet plates that hold a combination of power and data jacks and are hidden under sliding covers. The Stone or Glass top is built in sections around the trough which is offered in Brushed Aluminum, Charcoal Black powder coat, as well as custom finishes. Wires run in the trough, or under the center rails between pedestals and a 4"d grommet housing can be added between pedestals if needed. Pass-through wiring holes at 3/4"d or 2"d for permanently placed speaker phones, etc.