pictured: Axis Modern Glass Conference Table 54″x12.5′x29″h with a 4 piece Rectangular Glass top in 2 finishes: Blue Frosted and Charcoal Gray Back-paint. “Cross-hatch Brushed” Steel legs wit a 4″d wiring column between. Center wiring trough with 3 outlet stations under sliding covers. Stone or Glass tops supported by structural Steel I-beams with 1/2″ thick plate Steel legs in a custom Steel Conference Table line that can adapt to many size, shape & wiring requirements.
Axis Conference with Wiring Trough
Be the first to review “Axis Conference with Wiring Trough”
Large Conference Tables:
Multiple piece tops: 42/48/54/60" x 96/120/150/180/216" x 29"h.
Glass or Stone tops in multiple sections are supported by Structural Steel I-beams for large Conference tables to 30'.
The underlying mill texture on the plate Steel legs reads below the distinct brush patten for a refined industrial look. Integrated wiring options available.
3" Steel I-beams have a Blasted finish while 1/2" plate Steel legs are textured with a variety of Brush patterns and sealed with a clear Lacquer. Leg plate finish textures include: "Cross-hatch Brushed" (pictured), "Light Cross-hatch Brushed","Horizontal Brushed" or "Buffed" texture. A regimented brush pattern exposes the random mill finish pressed into molten steel during the "Hot Rolled" fabrication process.
Clear, Frosted (Green or Blue), Back-Painted (Charcoal-Gray, Silver or White) and "Scratched" glass tops are available with a Clear border ("Patterned") option. Clear & Diffused Glass tops expose the table structure whereas Back-painted Glass is opaque. Conference Tables to 30' in multiple pieces with a Blasted Steel T-bar between to stabilize and separate the sections from each other. Contrasting Glass finishes possible on multiple piece tops.
Stone tops have a Blasted or Hand-chiseled border. Options include Absolute Black Granite (Honed or Polished), Cleft Black Slate and Honed Jerusalem Limestone (Gray or Beige). Conference Tables to 30' in multiple pieces with a powder-coated T-bar between to stabilize and separate the sections from each other.
4"d wiring grommets have 2 power & 2 data outlets with a pass-though hole for additional corded audio/visual jacks. They are fitted in the end of a wiring column that extends down between the legs where it links the 2 legs of the pedestal. The column is held 3/4" above the floor to sit over a floor outlet. A stabilizer/ wire chase runs between pedestals and a 4"d grommet housing can be added between pedestals if needed. Pass-through wiring holes at 3/4"d or 2"d for permanently placed speaker phones, etc.
Center wiring trough option has adaptable outlet plates under sliding covers.