Archive for the Conference Table Power Category
This modern Conference table is custom adaptation from Stoneline Designs’ Tangent line. Designed to seat 14, pedestals are placed between chairs with 4″d wiring grommets in the 4 corner locations. The Tangent Conference Table line combines a steel and aluminum base with either a glass or stone top. Shown with polished Absolute Black Granite in 4 sections with an open center and a 1″ sandblasted border. Many Custom Conference Table top shapes are possible using an adaptable rail support structure on our full collection of pedestal designs.
Option: Wiring Trough with Sliding Covers. Our wiring trough option is available for the Crescent or Vector series only. A double rail system is used through the center of the conference table to support the top. The rails incorporate a track system that guides sliding covers. These covers can be finished in Brushed Aluminum, Powder-coated or veneered with Wood. Covers slide open to expose wiring plates that can be fitted with a variety of power and data jacks. There are fixed covers between the sliding ones that hide the top of the wiring trough. Wires are fed through the pedestal and hardwired to the electrical plates. The trough can be used as a raceway to run wires between pedestals, so that it is possible to feed wires up through only 1 location.
Wiring plates can be specified with 1, 2 or 3 duplex power outlets. Data outlets are fitted in 3 or 4 removable inserts per plate. The inserts can house duplex data jacks (cat.5 rj45 as standard) or a variety of other outlets including VGA, audio, etc.
Alternate Wiring Options. Several flip-top style wiring modules are available, and can be incorporated into any of our conference tables. Occasionally a client will specify a particular module from a different vendor and we work with them to fit it in our tables. These modules often have a small lip on the top that is designed to set on the top of the table surface.
Any Stoneline conference table can include a custom power/wiring system. Electronic devices such as computer, projector, or video conferencing equipment can connect to power and data ports cleverly concealed in the conference table top.
Stoneline Designs recently completed this granite conference table for a law firm in Las Vegas, NV.
Our most popular option for conference table power and data ports is the 4″ wiring grommet, shown here in a frosted glass conference table top:
Spring has arrived in North Carolina, and when weather permits, our artisans move some of their work outside. Here Mace uses a diamond drum to polish the wiring hole in a glass conference table top.
When the conference table is assembled, the hole will be fitted with a wiring grommet which houses power and data jacks under a removable cover. Most wiring grommets are flanged to cover the edge of the hole, and sit up on top of the table. Stoneline uses a grommet without a flange which is set flush with the tabletop surface, leaving the edge of the hole exposed. We hand polish and edge detail the hole, creating a focal point in the design of the table.
Running water reduces friction as Mace works, and tape protects the glass table top in case the diamond drum slips.
Our new bamboo conference table, the latest addition to Stoneline Designs’ line of office furniture, features the wiring trough with sliding cover. The cover slides open to reveal wiring plates which can be fitted with a variety of power outlets and data ports. When closed, the cover conceals the power outlets.
The wiring grommet is our most popular option for adding wiring/power to a conference table. A 4″ hole is cut into the table top, and fitted with a wiring grommet including 2 power and 2 phone/data jacks. The grommet includes a removable cap and is positioned over the pedestal so that wires can be concealed within the pedestal.
We just received this note from a customer who had purchased a conference table with built in power/data, and matching credenza. It really made our day.
The furniture arrived yesterday. It is unbelievable, and completely exceeded my expectations. I am a very details oriented person, and Monte’s attention to details and use of quality materials is unlike anything I’ve ever seen. Things like matching covers over screw holes, routed indentations so the center outlet cup doesn’t hang up on screw holes, grommeted cord pass-throughs and vents in the credenza, routed finger pulls, set screws in the power cups to perfectly adjust their height, soft felt backing on the back of the outlet cup covers so they don’t scratch the glass, and so on. The weight and quality of the materials also deserves note. The 3/4″ scratched glass is beautiful. The steel box tubing and 1/4″ steel pipe used for the outlet cups is substantial. The stuff is weighty, beautiful, and functional. I purchase a lot of high-end “designer” furniture, but none of it compares to this. I literally stumbled across Stoneline Designs doing a web search for a conference table, and I couldn’t be more satisfied with my decision to use you guys. In a world of poorly designed, mass-produced, cheaply constructed furniture, you guys stand alone in my opinion. Cutting edge contemporary designs crafted with true artisan hand-made craftsmanship. Rock on Stoneline.
Bass & Company Management Consultants
Thanks Don, we’re so glad the conference table and credenza are happy in their new home. Rock on!