Stoneline Designs recently completed this glass conference table for a high-tech professional services firm in the Washington DC area. The client required a table large enough to seat 12, with a sophisticated look. They chose our Crescent line of conference tables with a “scratched” glass top.
We custom designed this office furniture suite for a modern home office. The writing desk, credenza and hutch, all from the Axis line, feature brushed steel and dark wenge stained wood which looks good against the brick wall and hardwood floor. Our patterned “Scratched” glass finish adds a modern flair.
Honed Absolute Black Granite has developed a reputation as a difficult or problem material due to fingerprints showing on the stone. We have even seen columns calling honed absolute black granite a “nightmare” which no one should ever use. Read More
Stoneline’s Benjamin Grey Stone is a warm grey stone from Jerusalem with soft veining in a sweeping pattern over the whole surface. It is an excellent choice for a conference table, executive desk, occasional table or infrequently used formal dining table. Benjamin Grey is a medium hard stone and some scratching can occur. We recommend coasters and placemats to protect your stone table top.
For general cleaning the stone can be wiped down with water, a little soap and a soft sponge. Dish washing soap and warm water will remove fingerprints and most other oily spots. Very stubborn stains can be removed with a bristle scrub brush and cleanser such as Ajax. (This type of cleaning however will remove the luster and the finish will have to be reapplied.)
Repeated washing on highly used table tops will slowly wear off the sealer. The surface may eventually appear duller. For periodic maintenance , we recommend applying another coat of mineral oil. Frequency depends on use but approximately once every two years for an occasionally used dining table.
To reapply mineral oil top coat, mix Watco Natural interior oil finish (Woodworkers Supply 800-645-9292) with 20% Mineral Spirits and apply a thin coat. Wipe off the excess with a clean rag. Buff the surface with a dry rag until there are no puddles or beads of oil. Any oil that dries on the surface will appear glossy and the procedure will need to be repeated. Let dry 24 hours.
Re-Sealing The Finish
If a problem such as a stubborn stain occurs, it may be necessary to re-seal the finish. First wash the top thoroughly with a clean, soft sponge and warm soapy water. (Tough oil stains may need to be scrubbed out with a bristle brush and Ajax.) Use Acetone (or stripper purchased from HMK) to strip the finish only if it is necessary. After cleaning, rinse thoroughly with clean water to remove all residue from the cleanser, as this may effect the finish. Let the stone dry (a fan speeds the dry time). With a large, clean, soft rag, wet the surface with the sealer (use gloves). Apply a thin even coat and wipe up the excess with a clean rag. Any sealer left puddled on the surface will dry glossy. If necessary, reapply after the surface appears dry. A 3rd coat may be necessary if the stone has been stripped.
A Honed (satin) finish with a 1″ hand-tooled border detail is standard on all our Benjamin Grey Stone table tops. Standard Benjamin Grey width is 3/4″ thick (an approximate width due to surface variation in the natural material). Stoneline produces Benjamin Grey table tops in any size up to 60×108″. Larger table tops are constructed in multiple pieces, up to 30′ long.
Honing black granite creates a beautiful satin finish. However, the Honed finish is not as impervious as Polished. A honed granite table top will show discoloration from fingerprints or liquid stains, which must be treated with regular maintenance. Because of this, Absolute Black Granite, Honed Finish is somewhat controversial for home use. We do not recommend Honed Black Granite for kitchen countertops. Read More
Stoneline Designs has just completed design and installation of a home office including computer desk and custom wall unit. The client needed modern furniture for a beautiful contemporary home in Austin TX. The room where the office was to be located includes a glass wall overlooking a garden. Such strong architectural design demands equally strong furniture design. So they turned to Stoneline. Read More
The wiring grommet is an excellent solution to build power/ wiring into a conference table. It is unobtrusive when not in use, and provides basic outlets plus the flexibility to add additional cables through the pass-through hole. If more outlets are required multiple grommets can be installed, up to one per pedestal. Read More
As more and more conferences include high-tech applications like videoconferencing or online presentations, conference table power and data ports are becoming a necessity for many conference room tables. Read More